Qinhuan advance maintenance turbocharger oil

  With the advent of the era of high oil prices and the increasing emphasis on environmental protection, to introduce you to a few turbocharged vehicle maintenance tips.
Qinhuan oil ahead of maintenance
         In the process of working in a turbocharged engine, since the exhaust gas discharged from the work to drive a turbine engine cylinder, the temperature up to about 600 ℃, under high load conditions the temperature can reach 1000 ℃. So turbo technology models for oil consumption and lubrication requirements are particularly high,audi a4 1.8t turbo we proposed to shorten the factory specified 7,500 km service intervals of 5,000 km, and to make use of the original oil.

        If you feel relatively good condition, do not want to prematurely maintenance, but also regularly check the oil. For a period of one week, the oil dipstick regularly taken positions within a week, vernier is divided into three areas, there are MIN and MAX mark, between the MIN and MAX scale cross-line area is to add a zone, located MIN scale is necessary to add the following areas, located as not to add more than MAX area.
Slow start slow acceleration

         Although with technology upgrades turbocharged vehicle has not deliberately hot car a few minutes, but in various parts of the oil has not been adequately lubricated, high-speed operation will result in some parts of excessive wear, or even the status of failure. Therefore, turbocharged engine models after startup, audi a4 turbo do not rush the throttle, you should idle for 3 to 5 minutes, so there is plenty of time to pump the oil is transported to various parts of the turbocharger, audi a6 turbo standby oil temperature slowly rises after the turbocharger will be fully lubricated, then the speed will be like a duck.
Plus 97 # gasoline
         In cash TSI engine, for example, the vehicle's manual tips that can add 93 # or 95 # gasoline, but given the current gasoline market is uneven quality of various types of gasoline, gasoline mention relatively low purity, impurity more problems. Therefore, we recommend the use of turbo technology vehicle owners to use when adding gasoline 97 # gasoline, can also be appropriate to add some fuel additives when refueling, generally three to add one tank of fuel. Of particular note is that after adding a high-grade gasoline, avoid adding low-grade gasoline, but can be changed from low-grade gasoline grade gasoline, traveling more than 2000 kilometers, the vehicle fuel consumption will decrease, power, acceleration will have improved significantly. The use of high-grade gasoline, less impurities, burning more fully, can improve power, reduce fuel consumption and carbon appropriate. Fuel additives may increase the lubricity of gasoline can be reduced within the transport pipeline and the retention parts of the impurities.